Home / News / Industry News / The Basics of a Bottle Cap Mould
Home / News / Industry News / The Basics of a Bottle Cap Mould

The Basics of a Bottle Cap Mould

A Bottle Cap Mould is a tool used to produce caps to be used in water bottle, drink bottle and medical bottle. It is composed of two parts: the inner core and the supporting pieces. The inner core is inserted into the movable portion of the mould and the supporting pieces are in the place-giving troughs. The supporting pieces are then withdrawn to form a free bottle cap. The supporting pieces are connected to the inner core by a flexible shaft.

A Bottle Cap Mould can be of any shape, color, or price. However, you should consider various factors before you purchase one. To start with, the bottle cap mould should be sturdy and reliable. It should not be corroded easily. You should also consider the maintenance and reliability of the mould. In case of any problem, you should contact the manufacturer for repair or replacement. Make sure to choose a mould made of quality materials.

Plastic Bottle Cap Moulds usually feature multiple core sets. Each set has a different working cavity. These cores are mounted on the movable portion of the mold. The mold's movable part contains panels that slide into or out of their molding positions. The movable panel contains a limiting member to control the outer core's movement. It is connected to the panel by a hydraulic or pneumatic cylinder. The support is attached to a linkage mechanism on the injection molding machine.

When using plastic Bottle Cap Moulds, you should check the condition of the tooling. While an injection mould may be in good working condition, it can't always be guaranteed to meet the production requirements of a given project. Proper maintenance will extend the life of the plastic bottle cap mould and increase production levels. So, make sure to inspect your bottle cap mould regularly. If you do not, you might be wasting time and money.

When it comes to production, the cost of the plastic bottle caps depends on the design of the bottle cap mould. The size and complexity of the bottle cap mould are two factors that affect the cost. If the size of the mould is complex and complicated, this requires a lot of attention. If it is not, the cost of the project will be higher, and the quality of the caps will not be as high. In addition to this, the injection moulding process has a limited number of cavity replacements.

When you use a Bottle Cap Mould, you can make caps with many functions. These include resealing, pumping, or misting. You can also use these molds to produce other closure types, such as lotion pumps and sprayers. You can even add your own company logo to the cap! The possibilities are endless! So, buy a Bottle Cap Mould today and see the difference. You will be surprised at the results!

A bottle cap mould can make many types of plastics. These plastics are also recyclable. However, you must choose the right material for the media. For instance, if you want to use a bottle cap for liquids, it must be made of food grade polymers. If the bottle cap is meant to protect pharmaceuticals, then it should be made of food-grade polymers. The polywad is a layer of material between the bottle cap and the container. It serves many functions, including acting as a seal for the contents.

4L Two Parts Mobil Oil Cap Mould

4L Two Parts Mobil Oil Cap Mould Feature
1. This Cap have two parts, outer cap and inner dropper
2. Each cavity and core have independent cooling system for hot runner mould.
3. Different Insert parts can be engraved for different oil company brand name on top of cap
4. Stainless material have nice mirror hand polishing
5. Each mould plates with electroplating treatment, which play a very long time rust prevention
6. Runner system: Cold Runer, Half Hot Runner or Hot Runner system
7. Hot runner brand: China advanced brand or imported hot runner system brand.
8.Skilled Language in communication and experienced technical support

Contact Us