1. Mould Mold is one of the important factors that affect bottle blowing molding. The bottle body is a Huff mold and the bottom of the bottle is independent, which is typical. During the production process of the plastic bottle blowing machine...
Factors affecting bottle preform mold manufacturing Preform and its heating, pre-blowing (position, pressure and flow), stretching rod, high-pressure blowing (pressure, position) and mold, etc., these processes affect the factors that affect the manu...
Faults and treatment methods in the process of blowing mold 1. The action is not in place Solution: Check if something is stuck. Adjust the gas flow valve. 2. High temperature alarm for light box water channel. Solution: Disassemble the rubber tube c...
Causes and solutions of surface color and gloss defects of injection mold products! Under normal circumstances, the surface of plastic products obtained by this injection molding method has relatively good gloss and beautiful color, but in the actual...
Plastic mold is a key special tool for forming plastic products. If the quality of the mold changes, for example, the shape changes, the position moves, the molding surface becomes rough, and the contact of the clamping surface is not strict, it will...
We pay attention to the design of gas-assisted molds and strict mold processing. In the initial design, we will consider how to make the wall thickness distribution of gas-assisted products uniform, and then decide how to use the best air passage, an...
Manufacturing plastic molds is a very complicated process. From the initial design, processing, assembly, debugging and other steps to the final actual use, the impact of each process on the quality of the injection mold must be considered during the...
Plastic mold knowledge-the method of taking out the products remaining in the mold cavity: 1. Use a brass sheet to squeeze the product into the gap between the product and the mold, pry the product away from the mold cavity, but use this method with ...